Magmaweld ID 350 MKW ECO MIG Welder
Category
:
Welding Machines
Product Code
:
Magmaweld ID 350 MKW ECO MIG Welder
- Operates on 3-phase 400 V, 50/60 Hz utility voltage and generators. Tolerates voltage fluctuations of up to 15%.
- Thanks to inverter technology, it offers higher energy efficiency compared to conventional machines.
- It provides excellent welding performance with all types of solid and cored wires.
- The 4-roller feed system ensures good wire feeding even with long torches, enabling continuous welding without deformation, particularly with soft wires such as aluminum and flux-cored wire.
- The welding voltage and wire feed speed (welding current) are adjusted via the front panel.
- The optimal welding parameter selection chart is located on the inside of the wire feed cover.
- Free wire feed and gas test buttons, as well as trigger mode (2/4) and spot welding modes, are available.
- Soft Start, Pre-Gas, Post-Gas, Crater Filling, Burn-Back, and Flow Sensor settings are adjusted via the digital panel.
- ø300, ø270, and ø200 mm spools and all drum packaging are compatible.
- It features a 24V electrical output for the CO2 heater.
- It has large wheels and a gas cylinder platform for easy movement in the workshop and on-site.
- It is protected against missing phase, excessively high, and low mains voltage.
- It has an IP 23S protection rating.
| Power Supply | ||||
| Mains Voltage (3-Phase) | 400 | V | ||
| Power Consumed from the Mains | 18.9 | kVA | ||
| Power Efficiency | 85.21 | % | ||
| Power Consumption in Idle Mode | 23 | W | ||
| Source Current Adjustment Range | 50–350 | A | ||
| Rated Welding Current | 350 (40%) | A | ||
| Open-Circuit Voltage | 62 | V | ||
| Dimensions (L x W x H) | 1143 x 528 x 966 | mm | ||
| Weight (Net) | 82 | kg | ||
| Protection Class | IP23 | |||
| Wire Feeding System | ||||
| Wire Feed Speed | 1–24 | m/min | ||
| Torch Trigger Control | 2/4 | |||
| Welding Wire Diameter | 0.60–1.20 | mm | ||
To leave a review, you must be logged in and have purchased the product.*