Magmaweld ID 350MW-5 ECO MIG Welding Machine
Category
:
Welding Machines
Product Code
:
MAGMAWELD ID 350MW5 ECO
- Operates on 3-phase 400 V, 50/60 Hz utility voltage and generators. Tolerates voltage fluctuations of up to 15%.
- Thanks to inverter technology, it offers higher energy efficiency compared to conventional machines.
- It provides excellent welding performance with all types of solid and cored wires.
- The 4-roller feed system ensures good wire feed even with long torches, allowing for continuous welding without deformation, especially with soft wires such as aluminum and cored wire.
- The welding voltage and wire feed speed (welding current) are adjusted via the front panel.
- The optimal welding parameter selection chart is located on the inside of the wire feed cover.
- Free wire feed and gas test buttons, as well as trigger mode (2/4) and spot welding modes, are available.
- Soft Start, Pre-Gas, Post-Gas, Crater Filling, Burn-Back, and Flow Sensor settings are adjusted via the digital panel.
- ø300, ø270, and ø200 mm spools and all drum packaging are compatible.
- It features a 24V electrical output for the CO2 heater.
- It has large wheels and a gas cylinder platform for easy movement in the workshop and on-site.
- It is protected against missing phase, excessively high, and low mains voltage.
- It has an IP 23S protection rating.
Power Supply Mains Voltage (3-Phase) 400 V Power Consumed from the Mains 18.5 kVA Welding Current Range 50–350 A Rated Welding Current 350 (40%) A Open-Circuit Voltage 62 V Weight (Net) 82 kg Protection Class IP23 Wire Feed System Welding Wire Diameter 0.60–1.20 mm Wire Feed Speed 1–24 m/min Torch Trigger Control 2/4
To leave a review, you must be logged in and have purchased the product.*