Magmaweld ID 400 MKW PULSE EXPERT MIG Welding Machine

For MIG/MAG welding, it features a constant current and constant voltage (CC/CV) power source. 

This allows the operator to perform electrode and carbon cutting just as effectively as MIG/MAG welding.

ID 400MKW models are capable of welding with any type of robot. They are compatible with either digital or analog communication, depending on the robot type.

Magnet-ready; welding and environmental data are stored in real time.While some values can be read on the LCD panel on the front of the machine, other information (Overall Equipment Effectiveness—OEE, Welding Parameters—WP, Quality, etc.) is stored and monitored on the magNET platform. (optional)

There are three setting modes (Synergic, Easy, Normal) that make welding with conventional equipment very easy for the operator.

The Synergic feature allows the operator to select the wire type, wire diameter, gas type, and thickness required for optimal welding via the LED display.

With advanced features such as 6-trigger, double pulse, and others, the menu system provides professional users with access to all functions.

Trigger Mode (2/4), Soft Start (to initiate ignition without spatter), Pre-Gas, Post-Gas, and—for automation—Crater Filling, Back-Burn Time (to prevent sticking),  and Spot On/Off timing can be adjusted via the LED panel.

Welding voltage, welding current, and wire feed speed can be fine-tuned via a potentiometer according to the selected mode and monitored on the large digital display.

The wire feed section features a two-way switch for Manual Wire Feed and Gas Flow Control.

There is a separate wire feeding system for wire spools with diameters of 300, 270, and 200 mm, as well as a special cable inlet for the drum.

The four-wheel drive system ensures smooth wire feeding with long torches and enables continuous welding without deforming soft wires, such as aluminum and flux-cored wire.

The machine features an integrated gas cylinder platform and a 24V DC socket for a CO2 heater.

The water-cooling unit is located at the base of the transport cart and is powerful enough to provide cooling in hot weather and with long cable lengths.

The outer casing is made of steel for durability and is coated with electrostatic powder paint.

It has an IP 21S protection rating.

It is protected against missing phases and excessively high or low mains voltage.

It is fan-cooled and features protection against overheating.

Smart cooling ensures that rotating parts, such as the fan and pump motor, operate automatically based on their temperature levels. This feature provides low noise levels, reduced dust accumulation inside the unit, energy savings, and reduced maintenance requirements.