Magmaweld ID 500MW-5 ECO MIG Welding Machine
Category
:
Welding Machines
Product Code
:
Magmaweld ID 500MW-5 ECO
- Operates on 3-phase 400 V, 50/60 Hz utility voltage and generators. Tolerates voltage fluctuations of up to 15%.
- Thanks to inverter technology, it offers higher energy efficiency compared to conventional machines.
- It provides excellent welding performance with all types of solid and cored wires.
- The 4-roller feed system ensures good wire feeding even with long torches, allowing for continuous welding without deformation, especially with soft wires such as aluminum and cored wire.
- The welding voltage and wire feed speed (welding current) are adjusted via the panel in front of the wire feed unit.
- The selection table for optimal welding parameters is located on the inside of the wire feed cover.
- Free wire feed and gas test buttons, as well as trigger mode (2/4) and spot welding modes, are available.
- Soft Start, Pre-Gas, Post-Gas, Crater Filling, Burn-Back, and Flow Sensor settings are adjusted via the wire feeder system’s digital panel.
- ø300, ø270, and ø200 mm spools and all drum packaging types can be used.
- It features a 24V electrical output for the CO2 heater.
- It has large wheels and a gas cylinder platform for easy movement in the workshop and on-site.
- The standard cable length between the wire feed unit and the machine is 5 m, but it can be extended up to 30 m upon request (for models with a carrying case).
- It is protected against missing phases, as well as excessively high and low mains voltages.
- It has an IP 23S protection rating.
- The water-cooling unit provides powerful cooling. (On W models)
- Standard accessories are included with the machine.
-
Power Supply Mains Voltage (3-Phase) 400 V Power Consumed from the Mains 31.81 (40%) kVA Source Current Setting Range 50–500 A Rated Welding Current 500 (40%) A Open-Circuit Voltage 69 V Weight (Net) 115.75 kg Dimensions (L x W x H) 1170 x 528 x 1348 mm Wire Feeding System Welding Wire Diameter 0.80–2.4 mm Wire Feed Speed 1–24 m/min Torch Trigger Control 2 / 4 Dimensions (L x W x H) 660 x 315 x 443 mm Water Cooling Unit Cooling Capacity 1.02 kW Dimensions (L x W x H) 714 x 310 x 300 mm Weight (Net) 24 kg
To leave a review, you must be logged in and have purchased the product.*