Magmaweld MPM 15/400 IK Welding Generator
Category
:
Welding Generator
Product Code
:
Magmaweld MPM 15/400 IK Welding Generator
- It is powered by a water-cooled diesel engine and, in addition to its built-in welding function, provides auxiliary outputs of 400 V/50 Hz (3-phase), 230 V/50 Hz (3-phase), and 48 V/50 Hz (single-phase) for external use.
- In addition to successful welding with rutile, basic, and cellulose-coated electrodes, it offers Lift-TIG and carbon arc cutting capabilities. With the optional wire feeder unit, it enables MIG/MAG welding.
- The welding current can be adjusted via the potentiometer on the front panel and a remote control box with a 20-meter cable.
- Indicators for current, voltage, fuel level, and operating time are located on the front panel.
- It is specifically designed for outdoor use and has an IP23S protection rating. There is no loss of performance with long welding cables. It is compatible with a specially designed wheeled trailer. (Standard for the MPM 15/400 I-CL; optional for other models)
- It operates with a 12-volt internal battery and automatically switches to idle when there is no load.
- It features warnings for low fuel level, low oil pressure, and battery charging failure. It is equipped with ground fault and overheating protection.
- Electrode and ground clamps, as well as a remote control, are included as standard.
Motor Type KUBOTA D1105-E Power 28 HP Total Cylinder Displacement 1123 cm³ Number of Cylinders 3 Cooling System WATER Operating Type ELECTRIC Fuel DIESEL Fuel Consumption 4.9 (75%) lt/hr Fuel Tank Capacity 38 L Dimensions (L x W x H) 1590 x 730 x 920 mm Weight (Net) 450 kg Generator Type GenSet Asynchronous Brushless Maximum Power (1-Phase) 10 kVA – 230 VAC Maximum Power (3-Phase) 15 kVA – 400 VAC Power Factor 0.80 DC Source Circuit Rated Source Current 370 A – 35 VDC (35%) Rated Source Current 350 A – 34 VDC (60%) Welding Current Adjustment Range 30–400 A Open-Circuit Voltage 70 V Electrode Diameter 2.00–6.00 mm Maximum Carbon Cutting Electrode 6 mm
To leave a review, you must be logged in and have purchased the product.*