Yakamoz BMT-125 Digital Thermostat-Equipped 125-kg Sub-Atmospheric Powder Drying Ovens
Product Code
:
YKMZEKFBMT125
Capacity: 125 kg
Height: 50–130 cm
External dimensions: 90×124 cm
Number of Compartments: 2
Maximum heating temperature: 0–400 C
Temperature control: Digital
Power: 4,500 watts
Operating voltage: 380 V, 3-phase
Operating current: 21 amps
Thermal insulation: Available
Weight: 190 kg
OPERATING PRINCIPLE
The primary operating principle involves subjecting factory-produced welding flux to shock treatment by holding it at high temperatures, then lowering it to a low temperature for the drying process, and finally storing it in a resting state until it reaches the application point.
FUNCTION
Factory-produced submerged arc welding flux is subjected to a shock treatment at a temperature ranging from a minimum of 300°C to a maximum of 350°C
for 2 hours to undergo the shock-hardening process. In the second stage, the furnace temperature is reduced to 130°C for resting, and the powder is kept in the furnace until it is transferred to the application site.
After the drying process, submerged arc welding fluxes should be transferred to buckets via a bottom-discharge system and transported to the application site as quickly as possible; it is recommended to remove only the amount needed for use from the furnaces.
To leave a review, you must be logged in and have purchased the product.*