Yakamoz BMTŞD-350 Digital Thermostat-Controlled 350 kg + 350 kg Sub-Atmospheric Powder Shock Treatment and Drying Ovens
Product Code
:
The United Nations Conference on Trade and Development
Capacity: 350 + 350 kg
Height: 160 cm
External Dimensions: 180 x 80 cm
Maximum Temperature: 0–400°C
Temperature Control: Dual Digital Control
Operating Power: 4500 + 4500 W
Operating Voltage: 380 V, 3-phase
Operating Current: 42 amps
Thermal Insulation: Available
Weight: 390 kg
OPERATING PRINCIPLE
The primary operating principle is to enable the shock treatment of factory-produced welding fluxes by holding them at high temperatures and subsequently allowing them to rest, all carried out in two separate compartments with independent thermostats.
FUNCTION
Factory-supplied submerged arc welding flux is subjected to a shock treatment during its first use by being held at a temperature ranging from a minimum of 300°C to a maximum of 350°C
for 2 hours during the first use. In the second stage, the furnace temperature is reduced to 130°C for aging, and the powder is held in the furnace until it is transferred to the application area. These furnaces are designed for companies with high-volume operations in terms of both capacity and timing. Both the shock treatment and aging processes can be performed simultaneously.
The welding powders in the shock-cooling section can be transferred to the curing side upon completion of the process, allowing for a faster replenishment of new product. It is recommended to use only the amount of cured welding powder needed for the current application.
To leave a review, you must be logged in and have purchased the product.*